# Test instructions, default values
# NOTE: Properties files are encoded in Latin-1. Unicode chars must be escaped:
#  left single quote = \u2018
# right single quote = \u2019
#  left double quote = \u201C
# right double quote = \u201D

WelcomeVisual = Welcome to the Visual T.O.V.A. Test
WelcomeAuditory = Welcome to the Auditory T.O.V.A. Test

HoldButton = Hold the button in your writing hand with your thumb resting lightly on top of the button, like this.
HearClick = When you press the button, let up as soon as you hear the click; you don't have to hold it down.
PressToContinue = Press the button when you're ready to continue.
MeasuresAttention = This test measures your ability to pay attention.
TwoSquares = Two different squares will flash on the screen.
TwoTones = Two different tones will play on the speakers.
SquareTarget = One square has a small black square near the <span style=color:green>top</span>...
ToneTarget = One tone is a high note, like this:
SquareNontarget = ...and the other has the small square near the <span style=color:red>bottom</span>.
ToneNontarget = ...and the other is a low note, like this:
SquaresFlash = The squares will flash on the screen, like this:
TonesPlay = The tones will play every few seconds, like this:
PressVisualTarget = <span style=color:green>Press the button as fast as you can</span> every time you see a square with the small square <span style=color:green>near the top</span>...
PressAuditoryTarget = <span style=color:green>Press the button as fast as you can</span> every time you hear <span style=color:green>the high note</span>...
IgnoreVisualNontarget = ...and <span style=color:red>don't press the button</span> when the small square is <span style=color:red>near the bottom</span>.
IgnoreAuditoryNontarget = ...and <span style=color:red>don't press the button</span> when you hear <span style=color:red>the low note</span>.
PressVisualTarget2 = Once again, press the button only when you see the small square near the top.
PressAuditoryTarget2 = Once again, press the button only when you hear the high note.
DontGuessVisual = Don't guess which square will flash; make sure you see it before you press the button.
DontGuessAuditory = Don't guess which tone will play; make sure you hear it before you press the button.
Balance = Try to balance speed and accuracy: press the button as fast as you can, but also try not to make any mistakes.
MistakesOK = If you do make a mistake, don't worry: anyone can make a mistake on this test.
Review = Let's review:
ReviewPressVisual = Press the button as fast as you can, but only when you see the small square near the top.
ReviewPressAuditory = Press the button as fast as you can, but only when you hear the high tone.
ReviewPressOnce = When you press the button, only press it once and don't hold it down. Just \u201Cclick\u201D the button.
ReviewBalanceVisual = Finally, don't go too fast or try to guess; take enough time to see which square it is.
ReviewBalanceAuditory = Finally, don't go too fast or try to guess; take enough time to decide which tone it is.

Practice = You are about to take a short practice test.
PracticeCountdownVisual = After a countdown, the squares will begin to flash.
PracticeCountdownAuditory = After a countdown, the tones will begin to play.
PracticeBalance = Remember, be as fast and accurate as you can.

Test = You are about to take the T.O.V.A. test, which will take about 20 minutes.
TestShort = You are about to take the T.O.V.A. test, which will take about 10 minutes.
TestTiredVisual = You might notice that your eyes get a little tired. Even so, try and do the best job you can.
TestTiredAuditory = You might notice that you get a little tired. Even so, try and do the best job you can.
TestBalanceVisual = Remember to press the button as quickly as you can, but only when the small square is near the top.
TestBalanceAuditory = Remember to press the button as quickly as you can, but only when you hear the high tone.

# PTE only, but included here for reference
PressToBegin = Press the button when you're ready to begin.
